Categories
Manufacturers

    Annie Induction Annealer

    Annie Induction Annealer
    Annie Induction Annealer Annie Induction Annealer Annie Induction Annealer Annie Induction Annealer Annie Induction Annealer Annie Induction Annealer
    $484.00 
    SKU: AA1 
    Availability: In Stock
    Quantity: 10 pcs
    Order Increment: 1 pcs
    Average Rating: 5 of 5 Stars!
    Primary Voltage:
    Qty:  
    Add To Compare | Add To Wishlist

    Annie Induction Annealer-the perfect tool for annealing your cartridge brass!
    -It's FAST
    -It's SAFE
    -It's exactly the same every time!
    -It's warrantied for LIFE!

    *7-10 day backlog at present*

    5 of 5 Stars!    Review by   Harry Scatton  (Posted on Tuesday 31 January, 2017)

    I just received one of your annealers about a week ago. I set the whole thing up in about half an hour and started experimenting with the timing. I could not believe how easy it was to setup and operate your machine. I have historically been the world's biggest failure when it comes to a annealing with a propane torch. I could probably pay off my house if I cashed in the bucket of ruined brass casings resulting from my dismal annealing performances. I now consider myself the king of annealing. My friends are jealous of my factory perfect work. I am the envy of the shooting community in my area. All kidding aside this is an awesome addition to my reloading setup. I wish I had it years ago. Thank you for putting out such a great product.

    5 of 5 Stars!    Review by   John Scott Sr  (Posted on Wednesday 16 November, 2016)

    When I first started thinking about getting an annealer I was going to get a propane type and hook it to a 40-pound propane tank. I was talking about it with a friend and he said I should look at the induction annealers. I looked around and found Annie. A little more expensive than propane but no propane tanks to refill. When I first received the Annie I was impressed with how well it was packaged. Everything protected with styrofoam pellets as well as each part wrapped in bubble wrap. I removed everything that I had ordered. The Annie, water-cooled coil, the pump and container for the liquid, And the foot switch. I set the parts up on a bench that I had made just for annealing and put everything together. The set-up was very easy and well explained if you had questions. I annealed a few 223 and 300 ACC brass and everything looked great.I set everything up so I had to only move a small base that I have the brass setting on while it is in the coil. I watch the light indicating that it is heating then move the base and the brass drops into a bucket. I set up the Annie to run 30-06 brass. I had a little over 800 that I wanted to anneal. I wanted to see how many I could do without overheating. I set Annie for 2.2 seconds per round. I did a little over 800 rounds in a little over 45 minutes. I was going about a round every 3 seconds. I touched the coils several times and they were cool to the touch. I am so happy my friend told me about the option of induction annealing. I couldn't be happier. If you have any questions about the Annie give Garett a call and he will give you my e-mail address and I would be happy to share everything that I have found about it. Customer service is very good. Garett will do anything that he can to make sure that you are happy. I am not an employee of Fluxeon and I am not receiving any compensation for my review. I just want to share my experience with a great product.

    5 of 5 Stars!    Review by   Gary Ruisinger  (Posted on Wednesday 12 October, 2016)

    WOW!!! This induction heater is fast. 1.6 seconds to do a .223 and 2.0 on a 30-06. That's using 750 degree Tempilaq. Couldn't be easier to use and with the water cooled coil it never gets hot. My propane unit is going to the shed. Waiting on a 50BMG coil but expect it will work great too. If you are on the fence about a case annealer this is the one to get, you won't be sorry.

    5 of 5 Stars!    Review by   Albert Lembo  (Posted on Monday 10 October, 2016)

    5 days ago I received the unit with the water cooled coil and the recirculator accessory. Reading instructions and set up was about 10 minutes. I painted some 223 cases with 750 degree Tempilaq and determined my time to be an astonishing 1.3 seconds per case. 50 cases took me just less than 10 minutes. I always hated having to anneal in the dark with a torch. Compared to that, using my Annie, as Trump would say, is HUUUUUUUUUGE. Since that first day, I've done about 300 cases, including some 6mmbr (1.7 seconds), and they all look perfect. I haven't yet had the opportunity to load any of the cases I've done but, based on previous reviews, I'm expecting a positive result with the chrono. All this and a lifetime warranty too! BUY ONE! This unit will, I'm sure, be one of the best reloading accessories I've ever purchased.

    5 of 5 Stars!    Review by   Dario  (Posted on Saturday 01 October, 2016)

    After ensuring I had done all I could to my brass I was not satisfied with my ES. The rifle would shoot sub MOA at 100yds but the ES was in the 20s. I tried various suggested powders for my .243 and tried them at various temps. Last test I used a neck bushing that was .002 under and the ES came down to 17 ish. Then the Annie went to work. I kept what I had and just annealed each of the the cases to the same temp(used tempilaq) and time. ES came down to 7 - 8 fps. I was able to shoot a group with a CTC of .207 ! Folks for the price and ease of use nothing comes close to the Annie and I have not seen any other like product give you a lifetime warantte and the terrific service you will get from Garett. I do not work for Fluxeon and do not receive any compensation for endorsement. I'm just a very satisfied customer and very picky by nature. Thankyou Garett!

    5 of 5 Stars!    Review by   Stephen Liso  (Posted on Monday 12 September, 2016)

    Received the Annie in good order (well packed) through USPS, plugged it in and it worked perfectly on a 50 BMG as stated in the manual. Have been tinkering with other circuits, but the Annie is far more efficient and controllable. The service from Garett was excellent, and as such, I recommend this product to anyone thinking about an induction annealer for larger calibers.


    Write Your Own Reviews

    Please login to write review.

    Annie Flux Concentrator Coil
    Annie Flux Concentrator Coil

    Annie Flux Concentrator Coil, split ferrite, 1750-strand Litz wire

    Annie Water-Cooled Helical Coil
    Annie Water-Cooled Helical Coil

    Annie Water-Cooled Helical Coil is the most efficient coil geometry, and hence will give you the fastest anneal times. Almost twice as fast as the Flux Concentrator coil!

    Giraud Retrofit Coil
    Giraud Retrofit Coil

    A custom coil for retrofitting a Giraud automatic annealer from flame to induction.

    Fluxeon Universal Foot Switch
    Fluxeon Universal Foot Switch

    Fluxeon Universal Foot Switch-works on all our heaters and timers.

    Water Recirculator
    Water Recirculator

    Water Recirculator for the Annie water-cooled helical coil

    Tell a Friend
     
    Tell someone you know about this product.
    Popular Search Terms