Giraud Retrofit Coil | HS 851490

Description

A custom coil for retrofitting a Giraud automatic annealer from flame to induction.  Comes with the 3.5mm audio cable for the interface.

Available in convection (air) cooled

and water cooled versions. 

Which one do you want?

-Most cartridges that fit in the .5″ gapped ferrite will operate just fine with air-cooling.  In this case, water-cooling will give you that last bit of control over your process.  

-Many cartridges that require the .625″ gapped ferrite will do fine with convection-cooling.  however, your throughput will need to be slowed down.

-For the .75″ gapped ferrite, water-cooling is mandatory.  Cartridges such as the 50BMG will draw all 1200W out of the Annie, and require a burn time of 10-12 seconds.  That’s just too much for convection cooling to work.

Have a look at the Giraud system HERE!